AUREL Spa RTX915FSK3V Manual Do Utilizador
AUR.EL RTX-915 FSK FCC IC
650201418G
---------------------------------------------------------------------------------------------------------------------------------------------------
User manual
Le caratteristiche tecniche possono subire variazioni senza preavviso. La AUR°EL S.p.A non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
AUR°EL S.p.A. Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY Rev. 1.2 - 14.07.2016
Tel.: +390546941124 – Fax: +390546941660 Pag 1 di 10
http://www.aurel.it
- email:
aurel@aurel.it
Digital radio transceiver half-duplex, operates in USA band 902-928MHz, FSK modulation and integrated antenna.
It operates in transparent mode in simple way, by 3 pins TX-data, RX-data and TX/RX, the user can transmit and receive
It operates in transparent mode in simple way, by 3 pins TX-data, RX-data and TX/RX, the user can transmit and receive
custom packet until 4800bps (Manchester encoding).
The module has been designed for 3V supply with low consumption in receive mode (<6mA) and less than 1uA in
The module has been designed for 3V supply with low consumption in receive mode (<6mA) and less than 1uA in
power-down mode.
2 channels available, 915MHz and 916,5MHz, the RF output power is comply to FCC rules <2dBm ERP.
2 channels available, 915MHz and 916,5MHz, the RF output power is comply to FCC rules <2dBm ERP.
The module has FCC modular approval, it’s easy to integrate in custom devices without perform FCC radio certification.
Module is available in SMD version, whose size is 25,4 X 22 X 3,7 mm. Tape & reel package for automatic assembling by
Module is available in SMD version, whose size is 25,4 X 22 X 3,7 mm. Tape & reel package for automatic assembling by
pick and place.
PIN-OUT and dimensions
Absolute maximum values
Supply voltage
-0,3V +3,6V
Input voltage
-0,3V ÷ Vcc+0,6V
Output voltage
0V ÷ Vcc
Operating temperature
-20°C ÷ +70°C
Storage temperature
-40°C÷ +100°C
Pin-Out
1) GND
2) GND
2) GND
3) GND
4) GND
4) GND
5) +VCC
6) CHANNEL SELECTION
6) CHANNEL SELECTION
7) RSSI OUT
8) GND
8) GND
9) TX DATA INPUT
10) RX DATA OUTPUT
10) RX DATA OUTPUT
11) ENABLE
12) TX/RX
12) TX/RX
13) GND