Insulet Corporation 019 Manual Do Utilizador
92
7
n
Entering Blood Glucose Readings Manually
You can enter blood glucose readings manually into the PDM.
This is particularly helpful if you use a separate blood glucose
This is particularly helpful if you use a separate blood glucose
meter.
1. On the Home screen, use the Up/Down Controller buttons
1. On the Home screen, use the Up/Down Controller buttons
to choose More actions, then press Select.
2. Choose Add BG reading, then press Select.
3. Use the Up/Down Controller buttons to enter the BG read-
3. Use the Up/Down Controller buttons to enter the BG read-
ing from your separate meter.
4. Press Tag to assign a tag to the reading. Press OK when fin-
ished. (For an explanation of entering tags, see page 90.)
5. Press Save to save the reading.
Or press Cancel to return to the More actions menu without
saving the reading.
saving the reading.
The Bolus Entry screen does not open if:
•
A regular bolus is currently in process
•
The meter temperature is out of range
•
The BG reading has been tagged as a Control
•
The BG reading is less than your “Min BG for calcs”
•
Insulin is suspended
Figure 7-24
To enter a “LOW” reading, press the Up/Down
Controller buttons down until you reach the mini-
mum value (20); then press down one more time.
mum value (20); then press down one more time.
To enter a “HIGH” reading, press up until you reach
the maximum value (600); then press up one more
time.
time.