HP 608769-DH1 Manual Do Utilizador
Display assembly
Description
Spare part number
10.1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables,
and webcam/microphone module and cable):
and webcam/microphone module and cable):
●
10.1-in, WSVGA, AntiGlare, standard display assembly in black
607744-001
●
10.1-in, WSVGA, AntiGlare, standard display assembly in white
607745-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
607746-001
●
10.1-in, WSVGA, standard display assembly in black
619469-001
●
10.1-in, WSVGA, standard display assembly in black
619470-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black
618875-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA in red
622656-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622657-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red
622658-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue
622559–001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
6.
Disconnect the WWAN antenna cables from the WWAN module (see
7.
).
8.
Remove the keyboard (see
9.
Remove the top cover (see
).
Remove the display assembly:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
64
Chapter 4 Removal and replacement procedures