Hong Kong Modern Marketing Manufacturing Ltd. 1703A Manual Do Utilizador
8
CD Operation
CD Player
Programmed CD Playback
1
Make sure the power is on.
2
Press CD / BT BUTTON to select the CD
function. The CD display (- -) will flash, then
show (0 0) .
function. The CD display (- -) will flash, then
show (0 0) .
3
Press OPEN / CLOSE BUTTON to open CD
TRAY.
TRAY.
4
Insert CD in tray with the label side of CD facing
up.
up.
5
Press the OPEN / CLOSE BUTTON again to
close the CD TRAY.
close the CD TRAY.
6
Press PLAY / PAUSE BUTTON to begin playing
the CD.
the CD.
7
To stop playing, press the STOP BUTTON.
8
To skip to a different track, press the BACK SKIP
or the FORWARD SKIP button.
or the FORWARD SKIP button.
9
By pressing and holding either the BACK SKIP
or FORWARD SKIP BUTTON, you can rewind
or fast forward through each individual tack.
The track will fast forward or rewind as long as
you are holding the button. Once you release
the button, regular playback resumes.
or FORWARD SKIP BUTTON, you can rewind
or fast forward through each individual tack.
The track will fast forward or rewind as long as
you are holding the button. Once you release
the button, regular playback resumes.
10
During playback, you can use the repeat
function to repeat a single song or the whole
CD.
function to repeat a single song or the whole
CD.
11
While the song you want to repeat is playing,
press the REPEAT button once. You will see the
REPEAT INDICATOR on the jukebox start to
flash. The song will start over once it is finished.
press the REPEAT button once. You will see the
REPEAT INDICATOR on the jukebox start to
flash. The song will start over once it is finished.
12
Press the REPEAT button the second time to
repeat the whole CD. The REPEAT INDICATOR
will stay on without flashing.
repeat the whole CD. The REPEAT INDICATOR
will stay on without flashing.
13
Pressing the REPEAT button a the third time
will disable the repeat function.
will disable the repeat function.
This CD player is programmable which allows you
to program it to play only selected tracks. To
program, follow the steps below.
to program it to play only selected tracks. To
program, follow the steps below.
1
Insert disc and close CD TRAY. Do not press
play yet.
play yet.
2
Press the PROGRAM button. The PROGRAM
INCICATOR on the jukebox will start to flash.
INCICATOR on the jukebox will start to flash.
3
Use the BACK SKIP or FORWARD SKIP
BUTTON to select a track you want to program.
BUTTON to select a track you want to program.
4
Once you have selected a track, press the
program button again. This stores the track into
memory.
program button again. This stores the track into
memory.
5
Use the BACK SKIP or FORWARD SKIP
BUTTON to select the next track you want to
program. Once selected, press the program
button again.
BUTTON to select the next track you want to
program. Once selected, press the program
button again.
6
Repeat step number 5 until you have
programmed all desired tracks.
programmed all desired tracks.
7
Press PLAY / PAUSE BUTTON to begin playing
the selected tracks. The program light will stop
flashing and the selected tracks will begin
playing. They will play in the order that they
were programmed.
the selected tracks. The program light will stop
flashing and the selected tracks will begin
playing. They will play in the order that they
were programmed.
8
Using the BACK SKIP or FORWARD SKIP
BUTTON will only skip through the programmed
tracks.
BUTTON will only skip through the programmed
tracks.
9
To clear programmed tracks, press the stop
button twice until the program light goes out.
button twice until the program light goes out.
10
Programmed tracks will also be erased from
memory when the CD TRAY is opened or when
the power is turned off.
memory when the CD TRAY is opened or when
the power is turned off.