ATI Electronics Co. Ltd IE350 Manual Do Utilizador
-
4
-
⑦ Microphone
5. Battery information
The device is equipped with an integrated lithium‐polymer battery. The battery
cannot be replaced. Do not attempt to remove the battery from the device since it
would damage the device. The full performance of a new battery is not achieved
until after two or three complete charging‐discharging cycles. The battery can be
charged and discharged several hundred times, but it looses its capacity over time.
Disconnect the SH802 from the power supply as soon as the battery is fully charged,
overcharging would reduce the service life of the battery. A charged battery will lose
its capacity if it is not used on a regular basis.
Important: Ensure that the battery is fully charged if you do not use the device for a
long period of time. To avoid a complete discharge of the battery, the SH802 should
be charged at least every 3 months.
cannot be replaced. Do not attempt to remove the battery from the device since it
would damage the device. The full performance of a new battery is not achieved
until after two or three complete charging‐discharging cycles. The battery can be
charged and discharged several hundred times, but it looses its capacity over time.
Disconnect the SH802 from the power supply as soon as the battery is fully charged,
overcharging would reduce the service life of the battery. A charged battery will lose
its capacity if it is not used on a regular basis.
Important: Ensure that the battery is fully charged if you do not use the device for a
long period of time. To avoid a complete discharge of the battery, the SH802 should
be charged at least every 3 months.
6. Charging the battery
The SH802 is operated with a rechargeable battery. Charge the battery completely
before its first use. Read the section "Battery information" before starting the
charging process.
1)
before its first use. Read the section "Battery information" before starting the
charging process.
1)
Connect USB cable to a general USB power supplier.
2)
Connect the charger to the correct outlet.
3)
When the charger is connected to the headset, the red indicator light will
turn on. Charging the battery fully may take up to 1hours.
turn on. Charging the battery fully may take up to 1hours.