Manualsbrain.com
  1. Manuais
  2. Marcas
  3. E-Core Technology Co. Ltd.
  4. HP5286A
  5. Manual Do Utilizador

E-Core Technology Co. Ltd. HP5286A Manual Do Utilizador

Download
Página de 2
PS3 Lava Glow Wireless Controller 
Contents: 
  PS3 Lava Glow Wireless Controller 
  PS3 Lava Glow Wireless Receiver 
 
Operation: 
1.  Open the battery compartment located on the bottom of the PS3 Lava Glow Wireless controller. 
Insert 3 x “AAA” batteries 
2.  The PS3 Lava Glow Wireless controller feathers a 3 position power switch located on the bottom 
side of the controller 
  OFF=The controller is powered “OFF”; 
  LED OFF(middle Setting)=This setting allows you to have full use of the controller without 
the internal LED’s being “ON”; 
  ON LED=The controller and LED’s are powered “ON”. 
3.  With your PlayStation 3 ® game console powered “ON”, plug the PS3 Lava Glow Wireless 
Receiver into controller port #1 (or other, if using multiple controllers) of your game console. LED 
will begin to flash slowly. Press the “CONNECT” button on the receiver,(the LED will flash rapidly) 
4.  Press the “MENU” button on the PS3 Lava Glow Wireless Controller, the four (4) channel 
indicators flash rapidly; Press “MENU” button again to enter an operation channel, the 
corresponding channel indicator(s) will become solid, and the receivers LED as well. You are now 
ready to enjoy your new PS3 Lava Glow Wireless Controller. 
5.  Hold the “MENU” button for Three (3) seconds to enter main menu of PlayStation 3® game 
console. 
6.  When connecting multiple controllers, connect each controller separately. First connect player 
one’s controller and than connect the remaining controllers. The channel indicator(s) displaying 
as below: 
 
  Channel 1=Indicator one (1) lights up 
  Channel 2=Indicator two (2) lights up 
  Channel 3=Indicator three (3) lights up 
  Channel 4=Indicator four (4) lights up 
  Channel 5=Indicator one (1) + four (4) lights up 
  Channel 6=Indicator two (2) + four (4) lights up 
  Channel 7=Indicator three (3) + four (4) lights up 
 
TURBO Programming: 
Press any action button and “TURBO” button at same time to set the button with the TURBO function. 
Do it again to cancel TURBO function.