C-Com Corporation 56AZBT Manual Do Utilizador
5.8 AT# Commands
- Voice Modem Support
Note: All the following commands will return OK as a result code (or ERROR if the parameters are faulty), unless
stated otherwise.
#BDR=
<value>
Sets DTE Baud Rate
<value> - DTE Baud rate (0-48) *2400
#CID=
<value>
Enables the Caller ID feature in any mode
#CID=0 - Disable Caller ID
#CID=1 - Enable Caller ID (Verbose)
#CID=2 - Enable Caller ID (Numeric)
Writes the value to Sreg
Related S-Reg: S75
#RG=
<value>
Sets receive gain level (effects the AUDIO IN level)
<value> - 0-7fff
#TL=
<value>
Sets transmit level (effects the AUDIO OUT level)
<value> - 0-7fff
#CLS=
<value>
Same as +FCLASS=<value>
Sets Data/Fax Class1/Voice (0,1,8) mode.
Related S-Regs: S32, S150
#VBS
Bits per sample (ADPCM or PCM).
#VBS=<value> [<value> - 2,4 (ADPCM), 8,16 (PCM)]
#VBS? Returns the current setting
#VBS=? Returns 2,4,8,16
Related S-Regs: S76
#VBT
Sets Beep tone timer for generating tones and DTMF.