GRAUPNER CO. LTD. 16007500 Manual Do Utilizador

P5
-Reverse mode : Green LED will be blinked
second interval.

Program mode : Blink once per a second interval

Normal  mode  :  Blink  once  per  a  second  interval
(Repetition 5times)
Reverse  mode  :  Blink  twice  per  a  second  interval
(Repetition 5times)

(5) Fail Safe Set
Press right stick switch for a second at Program mode.
Press trim button per channels and select Fail pos mode
and Hold it.
Whenever  press  Trim  button,  Setting-condition  will  be
transferred to Receiver.
If press right-stick switch for a second, Fail safe setting
mode will be ended.
- Indication of Fail Safe mode : RED LED will be blinked
twice per a second interval.
  - Pos mode :    If Trim is UP, it is a Fail safe mode, and
Green  LED  will  be  blinked  twice  per  a  second  interval.
(Repetition 5times)
  - Hold mode :    If Trim is Down, it is a
Green LED will be blinked once per a second interval.
(Repetition 5times)

Program mode (Failsafe mode): Blink twice per a
second interval

Hold mode : Blink once per a second interval (
5times)
Pos mode : Blink twice per a second interval (
5times)

Green LED will be blinked twice per a

once per a second interval

Reverse mode : Blink twice per a second interval

stick switch for a second at Program mode.

per channels and select Fail pos mode

condition will be

stick switch for a second, Fail safe setting

LED will be blinked

If Trim is UP, it is a Fail safe mode, and

ce per a second interval.

Hold mode, and

Green LED will be blinked once per a second interval.

Blink twice per a

once per a second interval (Repetition

Blink twice per a second interval (Repetition

How to do Stick Calibration
(1) Enter to Stick Calibration Mode
Turn On the Radio, in state of
If enter to Mode, RED LED will blink 3 times.

Stick  calibration  mode  :  Blink  3  times  per  a  second
interval

(2) Set Stick Calibration
Move  all  sticks  from  side  to  Side  and
position.
After  operated  last  stick,  hold  it  to  middle  position  for
3Seconds.
If Set is done, Red and Green LED will blink 3Times at
same time.

Stick calibration mode

Blink 3 Times per a second interv

※ after that, it is moved to Dead Range set mode
automatically.

(3) Dead range set
This is for keep Neutral position
accurate Neutral value.
Dead  range  set  about  Neutral  position,  is  set  by  trim
switch up and down.
It can be settable from 1 to 6 steps.
※  in case of Throttle CH1, there is no spring, Do not set.
( only set for CH2, CH3, CH4
Green LED will blink depends on Neutral set steps.
For  example,  if  you  set  Dead  range  to  6%,  LED  will
blink 4times per a second interval.


Dead range mode

Blink 3times per a sec interval.

Dead range set
Blinks depends of setting value
If set is done, press left stick button for 2 sec.

Stick Calibration Mode

, in state of pressing left stick switch.

f enter to Mode, RED LED will blink 3 times.

: Blink 3 times per a second

Move all sticks from side to Side and back to middle

fter operated last stick, hold it to middle position for

Red and Green LED will blink 3Times at

Stick move done

Blink 3 Times per a second interval

after that, it is moved to Dead Range set mode

position, in case of they have no

Dead range set about Neutral position, is set by trim

from 1 to 6 steps. ( 0, 2, 4, 6, 8, 10% )

, there is no spring, Do not set.

only set for CH2, CH3, CH4 )

Green LED will blink depends on Neutral set steps.

or example, if you set Dead range to 6%, LED will

s per a second interval.

Blink 3times per a sec interval.

Blinks depends of setting value (6 steps)

f set is done, press left stick button for 2 sec.