Inscape Data Co. AGNVC110W Manual Do Utilizador
NVC100/110 User’s Manual
50
50
50
50 of
of
of
of 51
51
51
51
6.4.
How To Upgrade Your NVC100/110 System
There are two ways of upgrading the system software of the NVC100/110. In most cases it is
more convenient to upgrade the system software in automatic sequence. But when your
NVC100/110 cannot be connected to our upgrade server, it is recommended you use a manual
upgrade.
NVC100/110 cannot be connected to our upgrade server, it is recommended you use a manual
upgrade.
1. Automatic Upgrade
1) Connect to the NVC100/110 and log on to administrative mode with administrator’s ID and
Password. Then start “Upgrade & Reset” menu.
2) When your system software is older than the latest release, the admin page will indicate
this fact with a blinking red arrow mark on the right of the “Upgrade & Reset” menu.
Click the “Upgrade & Reset” menu when the indicator is blinking. You will find a screen
as shown in Figure 5-12. Click the “UPGRADE” button to start the upgrade.
Click the “Upgrade & Reset” menu when the indicator is blinking. You will find a screen
as shown in Figure 5-12. Click the “UPGRADE” button to start the upgrade.
3) The server will notify the end of the upgrade process on your screen.
4) Click the Confirm button to the right of System Reset to reboot the NVC100/110.
5) After the reboot is finished, log on to the NVC100/110 with administrator ID and password.
4) Click the Confirm button to the right of System Reset to reboot the NVC100/110.
5) After the reboot is finished, log on to the NVC100/110 with administrator ID and password.
Then click the “Status Report” menu to display the current status of the NVC100/110.
6) Confirm the version number and date of all the system software on your NVC100/110.
2. Manual Upgrade
1) Save the upgraded system software to your PC. Upgrade software can be downloaded from