Foreign Trade Corporation dba. Technocel T130 Manual Do Utilizador
Specifications:
Input: 5V / 1.8A
Output: 5V, 1A
Output: 5V, 1A
Included:
Verizon Qi Wireless Charging Pad
5V Power Adapter
5V Power Adapter
VERIZON
Qi WIRELESS
CHARGING PAD
Qi WIRELESS
CHARGING PAD
* Use the included power supply for fastest charging rate. Using
a power supply rated under 1.8A will cause the phone to charge
slower, indicated by a blinking red LED
slower, indicated by a blinking red LED
Remove protective film from base. Place charger
on a dry, clean, flat, smooth surface. It will adhere
immediately without any pressure needed. To
remove or reposition, pull up one corner slowly and
gently.
on a dry, clean, flat, smooth surface. It will adhere
immediately without any pressure needed. To
remove or reposition, pull up one corner slowly and
gently.
Power-up the Verizon Qi Wireless Charging Pad by
inserting the included Micro-USB power cord into
the power port*.
inserting the included Micro-USB power cord into
the power port*.
Place your Qi™ compatible
device on the charging
pad to begin charging.
device on the charging
pad to begin charging.
ICXXXX
While in Standby mode, the LED is OFF. Solid red
LED indicates Verizon Qi Wireless Charging Pad is
delivering full power.
LED indicates Verizon Qi Wireless Charging Pad is
delivering full power.
If the red LED is on but no power is being received
by the device, there may be a metal object near
the coils. Pick up the device and remove foreign
objects and place device back on the Verizon Qi
Wireless Charging Pad. This is a safety feature
and normal operation.
by the device, there may be a metal object near
the coils. Pick up the device and remove foreign
objects and place device back on the Verizon Qi
Wireless Charging Pad. This is a safety feature
and normal operation.
Standby
Charging
LED indicator light
To find your devices
charging spot, keep your
device centered on the
pad horizontally.
charging spot, keep your
device centered on the
pad horizontally.
Now move your device up
or down slowly until your
device starts charging.
or down slowly until your
device starts charging.
Note: If your device does
not start charging,
continue to move your
device slowly up or down,
stopping for 2 seconds
every
not start charging,
continue to move your
device slowly up or down,
stopping for 2 seconds
every
¼ inch.
When the red light
appears on the charging
pad, your device should be
charging.
appears on the charging
pad, your device should be
charging.
To help achieve proper
charging placement next
time, make note of
buttons or home screen
features in relation to the
charging pad surface.
charging placement next
time, make note of
buttons or home screen
features in relation to the
charging pad surface.
CAUTIONS
The Verizon Qi Wireless Charging Pad works with Qi Wireless
Charging compatible smartphones and devices.
The charging unit should only be used at normal indoor
room conditions.
Place charger on a hard flat surface.
Use the supplied 5V 1.8A power adapter included with the
Verizon Qi Wireless Charging Pad.
The Verizon Qi Wireless Charging Pad and your
smartphone/device may become warm during charging.
Avoid direct contact with highly flammable materials.
Avoid contact with delicate furniture finishes.
Charging compatible smartphones and devices.
The charging unit should only be used at normal indoor
room conditions.
Place charger on a hard flat surface.
Use the supplied 5V 1.8A power adapter included with the
Verizon Qi Wireless Charging Pad.
The Verizon Qi Wireless Charging Pad and your
smartphone/device may become warm during charging.
Avoid direct contact with highly flammable materials.
Avoid contact with delicate furniture finishes.
FCC Information
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC and other RF exposure requirements, please
maintain a distance of 20cm between the charger and your body when
in use.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Changes or modifications made to this equipment not expressly
approved by the manufacturer may void the FCC authorization to
operate this equipment.
FCC ID: SZQ-T130
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules
[and with RSS-210 of Industry Canada].
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC and other RF exposure requirements, please
maintain a distance of 20cm between the charger and your body when
in use.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Changes or modifications made to this equipment not expressly
approved by the manufacturer may void the FCC authorization to
operate this equipment.
FCC ID: SZQ-T130
CARE AND MAINTENANCE (General)
Keep Device Dry. Do NOT expose the device to liquids.
If device gets wet, immediately unplug it and allow
it to dry.
Do not disassemble or attempt repair.
Do not store the device in high or low temperatures.
If device gets wet, immediately unplug it and allow
it to dry.
Do not disassemble or attempt repair.
Do not store the device in high or low temperatures.
CARE AND MAINTENANCE (Sticky Suction)
To clean the charging pad base, use soft, damp cloth
or scotch tape. Do NOT use solvents, alcohol
or cleaners.
or scotch tape. Do NOT use solvents, alcohol
or cleaners.