YEALINK NETWORK TECHNOLOGY CO. LTD. RT20U Manual Do Utilizador

 

 

DECT Repeater RT20U User Guide 

www.yealink.com

 

 

Note: The repeater should be used with Yealink original USB 

power adapter (5V/0.6A) and           the USB cable only. The use 
of the third-party USB power adapter or USB cable may           
cause the damage to the repeater.

 

Yealink DECT repeater RT20U is designed in 

accordance with Digital Enhanced Cordless 

Telecommunication (DECT) standard. It can be 

deployed to extend the range of the Yealink IP DECT 

phone (e.g., W52P, W56P) to cover areas where 

reception was previously not available. All the usual 

handset functions are supported by the base station 

in the extended radio range. 

The repeater, base station and cordless handset 

employ wireless connection. Signals are exchanged 

without acoustical and visual differences.       

3

 

Up to 5 repeaters can be registered to one base station to extend available 

reception range for all registered handsets. All repeaters must be installed 

within the base station coverage area (up to 300m in unobstructed 

outdoor areas and up to 50m inside buildings), as shown in the figure 

below. It is not possible to install the repeaters in series or “daisy-chain”.   

 

If the DECT link quality of RT20U is in excellent-to-good condition, you can 

register up to 5 handsets to your base station and the base station can 

handle a maximum of 4 calls at one time. 

Wall