Herutu Electronics Corporation TW800T Manual Do Utilizador
TW-800
14
■How to use
1. Power switch of receiver is turned on. Please confirm the LED situation as turning off.
When the LED for receiving turns on, the transmitter is not registered by pairing. Please make a pairing with
transmitter.
2. Transmitter transmits the signal at striking the limit switch by tightening the bolts from torque wrench.
When the communication is done normally, receiver output the relay output and receiver sounds the buzzer
according to setting. Green LED of transmitter turns on 1 time.
When the communication is not done normally, receiver doesn’t move.
While the receiver output relay output or while receiver is in double count protect time, receiver transmit the
busy signal to transmitter. When the transmitter receives the busy signal, the Green LED of transmitter flashes
3 times.
Transmitter
Receiver
Communication
OK
Green LED 1 time flashing
LED 1 time flashing
Communication
NG
Red LED 10 times flashing
－
BUSY
Green LED 3 times flashing
－
Buzzer sound time is usually for 100ms.When the relay output is set 50mses and double count protect time is
set 10mses, Buzzer sound time is 50msec.
LED for receiving (Green)
(Lighting switch for pairing)