TP-Link Technologies Co. Ltd. TDW8151NV4 Manual Do Utilizador
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
37
Encryption: Select the encryption you want to use: TKIP or AES (AES is an encryption
method stronger than TKIP).
TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides
dynamic encryption keys for each packet transmitted.
dynamic encryption keys for each packet transmitted.
AES (Advanced Encryption Standard) - A security method that uses symmetric 128-bit
block data encryption.
block data encryption.
Pre-Shared Key: Enter the key shared by the Router and your other network devices. It must
have 8-63 ASCII characters or 64 Hexadecimal characters.
4) WPA2-PSK
To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu
will change to offer the appropriate settings. WPA2-PSK requires a shared key and does not use a
separate server for authentication. PSK keys can be ASCII or Hex type.
will change to offer the appropriate settings. WPA2-PSK requires a shared key and does not use a
separate server for authentication. PSK keys can be ASCII or Hex type.
Figure 4-27
5) WPA-PSK/WPA2-PSK
To configure WPA-PSK/WPA2-PSK settings, select the WPA-PSK/WPA2-PSK option from the
drop-down list. The menu will change to offer the appropriate settings. WPA-PSK/WPA2-PSK
requires a shared key and does not use a separate server for authentication. PSK keys can be
ASCII or Hex type.
drop-down list. The menu will change to offer the appropriate settings. WPA-PSK/WPA2-PSK
requires a shared key and does not use a separate server for authentication. PSK keys can be
ASCII or Hex type.
Figure 4-28
4.3.3.1 WPS Settings
WPS Settings: WPS can help you to add a new wireless device to an existing network
quickly. This section will guide you how to use WPS function.
WPS state: Display the current WPS state.
WPS mode: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless adapter and Router using either Push
establish a wireless connection between wireless adapter and Router using either Push