TP-Link Technologies Co. Ltd. TLWPA4220V3 Manual Do Utilizador
9
Chapter 2
Initial Use
For example,
I already set up a wireless network using powerline
devices, but the wireless network is still not big enough to reach
the top floor. So I bought a new powerline extender to extend
the wireless network.
the top floor. So I bought a new powerline extender to extend
the wireless network.
1.
Plug the new powerline extender into a wall socket near one
of the existing powerline extender.
of the existing powerline extender.
New Powerline Extender
TL-WPA4220
Existing Powerline Device
(For demonstration only)
Pow
erline
2.
Check the new extender’s Powerline LED . Is it on?
• If it is on, follow Step
4
>
A
.
• If it is off, follow Step
3
and Step
4
>
B
.
3.
Add the new powerline extender to the existing powerline
network by pairing two powerline devices.
a . Press the Pair button on the existing powerline device for
network by pairing two powerline devices.
a . Press the Pair button on the existing powerline device for
1 second. The Power LED starts blinking.
Note: If the Power LED does not blink, press again.
b . Within two minutes, press the Pair button on the new
powerline extender for 1 second. The Power LED starts
blinking. When the Powerline LED turns solid, the pairing
process is complete.
blinking. When the Powerline LED turns solid, the pairing
process is complete.
On
Blinking
Blinking
within 2 minutes
Existing
Powerline Device
New Powerline Extender
TL-WPA4220
4.
Relocate the new extender to the Wi-Fi “dead” zone.
How can I
do that?