TP-Link Technologies Co. Ltd. TLWPA4220V3 Manual Do Utilizador
17
Chapter 3
Configuring via Web Management Interface
To hide SSID:
Select Hide SSID, and your SSID will not be broadcasted. It won’t display when you scan
for local wireless network list on your wireless device and you need to manually join the
network.
for local wireless network list on your wireless device and you need to manually join the
network.
To have more advanced settings
Click
Advanced
below
Password
to have more advanced settings.
Security:
Select an option from the Security drop-down list. The extender provides
three options, No Security, WPA/WPA2 Personal (Recommended), and WEP. WPA2
uses the newest standard and the security level is the highest. Don’t change the default
settings unless necessary.
uses the newest standard and the security level is the highest. Don’t change the default
settings unless necessary.
Mode:
Select the desired mode.
• 802.11n only: Select only if all of your wireless clients are 802.11n devices.
• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.
• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless
• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.
• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Note:
When 802.11n only mode is selected, only 802.11n wireless clients can connect to the extender. It
is strongly recommended that you select 802.11b/g/n mixed, so that all of 802.11b, 802.11g, and 802.11n
wireless clients can connect to the extender.
Channel Width:
Select the channel width. The default setting is Auto, which can adjust
the channel width for your clients automatically.