TP-Link Technologies Co. Ltd. WA60XG Manual Do Utilizador

 

 

20

 

Figure 3-13 Add or Modify Wireless MAC Address Filtering entry 

To add or modify a MAC Address Filtering entry, follow these instructions: 

1.  Enter the appropriate MAC Address into the MAC Address field. The format of the MAC 

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 
00-0A-EB-B0-00-0B.  

2.  Enter a simple description of the wireless station in the Description field. For example: 

Wireless station A. 

3.  Privilege - Selects the privileges for this entry, one of Allow / Deny / 64-bit / 128-bit / 

152-bit.  

4.  WEP Key - If you select 64-bit,  128-bit or 152-bit  in the Privilege field, enter any 

combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. For example: 
2F34D20BE2.  

5.  Status - Select Enabled or Disabled for this entry on the Status pull-down list. 

6. Click 

the 

Save button to save this entry. 

To add additional entries, repeat steps 1-6. 

)

When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled. 

To modify or delete an existing entry: 

1. Click 

the 

Edit or Delete button in the Modify column in the MAC Address Filtering Table. 

2.  Enter the value as desired in the Add or Modify Wireless MAC Address Filtering entry 

page, and click the Save button. 

You can click the Enable All button to make all the entries effective, click the Disable All button 
to make all the entries ineffective, click the Delete All button to delete all the entries. 

Click the Next button to go to the next page and click the Previous button to return to the 
previous page. 

If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be able to access 
the AP, the wireless station B with MAC address 00-0A-EB- 00-07-5F not be able to access the AP,