TP-Link Technologies Co. Ltd. WR841NV13 Manual Do Utilizador
53
Chapter 4
Configure
¾
To add a Bandwidth control rule:
1. Click
Add New
.
2. Enter the information as the figure shown below.
3. Click
Save
.
4. 13. IP&MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4. 13. 1. Binding Settings
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.
2. Go to
IP & MAC Binding
>
Binding Settings
.
3. Select
Enable
for ARP Binding.
4. Click
Save
.
¾
To add IP & MAC Binding entries:
1. Click
Add New
.
2. Select the
Bind
checkbox.