ENERNET Corporation 10500 Manual Do Utilizador

January, 2005 – Operators Manual 
ENERNET Corporation 

4 

The seven-button T9000 thermostat  provides programmable 
functions.  The user can set the clock and program the thermostat 
to automatically set specified temperatures at specified times. 

PROGRAM: 
Places the T9000 into program mode. 

RUN: 
Causes the T9000 to run or stop running its program. 

CLOCK: 
Places the T9000 into clock setup mode. 

As you  adjust the clock and program  your T9000, notice that the 
display helps you by continuously blinking the item you are ready to 
change.  The  UP and  DOWN buttons change settings,  the 
HEAT/COOL button is used to ENTER or keep a change.    
 
To set the clock, you will use the buttons marked  CLOCK,  UP, 
DOWN, and HEAT/COOL. 
 
STEP ONE: 
Press the CLOCK Button.  The hour digits will flash.  Press the UP 
or DOWN button to change to the proper hour.  Note that AM / PM 
will  change as you roll the hour past 12.  Be sure to set the hour 
properly for AM or PM.  Press the HEAT/COOL button to keep the 
hour you've just set and to move to minutes. 
 
STEP TWO: 
The Minute digits will now be blinking.  Press the  UP or  DOWN 
button to change to the desired minute.  When the correct minute is 
flashing press HEAT/COOL. 
 
STEP THREE: 
One of the seven day icons (Mo, Tu, We, Th, Fr, Sa, Su) will now 
flash. Press  UP or  DOWN until you see the current day icon 
flashing. When the correct day is flashing press HEAT/COOL. 
 
STEP FOUR 

 
 
 

Press the  CLOCK button to keep all clock changes you've made 
and resume normal operation.  
 

PROGRAM 

RUN 

CLOCK 

Th 

Current 
Temperature 

Mode of 
Operation 

Setpoint 

Fan Status 

11:20 

AM

Time & Day 

Program Period 

Set Point