Impinj Inc. XARRAY Manual Do Utilizador
Speedway Revolution Installation and Operations Guide Octane 4.11
Appendix C: Speedway xPortal Installation
Appendix C: Speedway xPortal Installation
56
Revision 4.11 Copyright ©2014, Impinj, Inc.
Conduit Attachment
The round openings in the top and bottom of xPortal are designed so you can run metallic
conduit directly to the unit. This allows Ethernet or power cables to be protected by
standard EMT (electrical metallic tubing). The holes are sized for ½ inch trade size conduit
connectors, or where metric conduit is used, 16mm trade size. Larger sizes of conduit (such
as ¾ inch) can be used with the proper adapters. See example Figure 3 below.
conduit directly to the unit. This allows Ethernet or power cables to be protected by
standard EMT (electrical metallic tubing). The holes are sized for ½ inch trade size conduit
connectors, or where metric conduit is used, 16mm trade size. Larger sizes of conduit (such
as ¾ inch) can be used with the proper adapters. See example Figure 3 below.
The following photos highlight the usage options.
Figure C.3 ½ inch conduit with a threaded nut flange connector