Datastrip Inc. DSV2SC01 Manual Do Utilizador
DSV2+
Turbo
User Manual, Version 1.09
21
Copyright © 2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
7.3 PIV Card and CHUID Verifier (DatastripPIVCard_CHUIDVerifier.exe)
The DSV2+ CHUID software allows an operator to read and authenticate PIV cards as defined
by “SP 800-73, Section 1.8.3”. The application is located in the “\Storage Card\DSVII”
directory in the folder PIVCardApps. Double tap on DatastripPIVCard_CHUIDVerifier and the
Main Menu will open:
by “SP 800-73, Section 1.8.3”. The application is located in the “\Storage Card\DSVII”
directory in the folder PIVCardApps. Double tap on DatastripPIVCard_CHUIDVerifier and the
Main Menu will open:
The Main Menu:
The main menu is divided into sections: The first section is the
Activity Log window. In this window data sent and retrieved
from the cards is captured for Auditing and diagnostic purposes.
Activity Log window. In this window data sent and retrieved
from the cards is captured for Auditing and diagnostic purposes.
There are 5 Buttons in the Main Menu, as well as 2 radio buttons,
and the OK/Exit controls as seen below
and the OK/Exit controls as seen below
The usage of each button is as follows:
The OK or X buttons - These buttons located in the upper right
corner of the application are used to close or terminate the
application. Clicking either of these buttons will shut down the
application.
corner of the application are used to close or terminate the
application. Clicking either of these buttons will shut down the
application.
The CHUID Button - The CHUID button will perform a number of tests on the card and extract
the CHUID details. Additionally it will check the configuration settings of the program and
determine if the information stored in the card is to be accepted at
this particular station or not. It will also ensure that the card has
not expired.
the CHUID details. Additionally it will check the configuration settings of the program and
determine if the information stored in the card is to be accepted at
this particular station or not. It will also ensure that the card has
not expired.
The process to read/verify the PIV card is as follows:
1. Insert the CHUID card into the unit as shown (Contact
facing up.)
2. Click the CHUID Button.
3. The reader will attempt to parse the data from the PIV
3. The reader will attempt to parse the data from the PIV
Card and look for the following error conditions.
a. Expired or Abnormal Expiration Data.
b. Non Authorized or incorrect data in the following
b. Non Authorized or incorrect data in the following
fields
i. FASC-N
ii. Agency Code
iii. Organization Code
PIV Card Rejected - Error Conditions:
If either error condition is met the application will display
an error message on top of the Activity Log Window and
notify the operator of a non acceptable PIV card.
an error message on top of the Activity Log Window and
notify the operator of a non acceptable PIV card.