Pismo Labs Technology Limited P1AC8 Manual Do Utilizador
Pepwave MAX and Surf User Manual
http://www.pepwave.com
149
Copyright @ 2016 Pepwave
support. For additional information regarding CLI, please refer to Section 21.16.
CLI SSH Port
This field determines the port on which clients can access CLI SSH.
CLI SSH
Access
This menu allows you to choose between granting access to LAN and WAN clients, or to
LAN clients only.
LAN clients only.
Security
This option is for specifying the protocol(s) through which the web admin interface can be
accessed:
accessed:
•
HTTP
•
HTTPS
•
HTTP/HTTPS
Web Admin
Port
This field is for specifying the port number on which the web admin interface can be
accessed.
accessed.
Web Admin
Access
This option is for specifying the network interfaces through which the web admin interface
can be accessed:
can be accessed:
•
LAN only
•
LAN/WAN
If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.
WAN Connection Access Settings
Allowed
Source IP
Subnets
This field allows you to restrict web admin access only from defined IP subnets.
•
Any - Allow web admin accesses to be from anywhere, without IP address
restriction.
restriction.
•
Allow access from the following IP subnets only - Restrict web admin access only
from the defined IP subnets. When this is chosen, a text input area will be displayed
beneath:
The allowed IP subnet addresses should be entered into this text area. Each IP subnet
must be in form of w.x.y.z/m, where w.x.y.z is an IP address (e.g., 192.168.0.0), and m is
the subnet mask in CIDR format, which is between 0 and 32 inclusively (For example,
192.168.0.0/24).
must be in form of w.x.y.z/m, where w.x.y.z is an IP address (e.g., 192.168.0.0), and m is
the subnet mask in CIDR format, which is between 0 and 32 inclusively (For example,
192.168.0.0/24).
To define multiple subnets, separate each IP subnet one in a line. For example: