KCodes Corporation KCODES-901 Manual Do Utilizador
© 2014 KCodes Corporation. All rights reserved. 6 Series v2 User’s Manual V1.0
KCodes 9 Series Print Server
User’s Manual
Chapter 1 Introduction
Thank you for purchasing 901n/901i Print Server (in the following referred to as “Server”). This Server is
designed to connect your Printer,
designed to connect your Printer,
Multifunction Printer, iPhone, iPod to your network, allowing all network
users’ access to these shared USB devices.
1.1 About 2 Models Described in this Manual
This manual provides introductory information as well as detailed instructions on how to set up and
manage 9
manage 9
Series in various network environments. The following table shows the differences among the
2 models. All 2 models have one USB port, a 10/100 Mbit/sec Lan port and an additional wireless module
(802.11b/g/n). However, 901n is external antenna while 901i is internal antenna. Except for the antenna
type, most configuration and operations are the same for 901n and 901i. Unless explicitly specified, all
instructions in the manual apply to 9
(802.11b/g/n). However, 901n is external antenna while 901i is internal antenna. Except for the antenna
type, most configuration and operations are the same for 901n and 901i. Unless explicitly specified, all
instructions in the manual apply to 9
Series.
Model Name
LAN
Wireless
Antenna
USB Port(s)
901n
Yes
Yes
external
1
901i
Yes
Yes
internal
1
To fully benefit from this document, you should be familiar with basic networking principles. The
instructions described in this manual are based on the settings in a new Server. To reload the Factory
Parameters, you can reset this Server back to Factory Default, which will restore most of the settings. For
details, please refer to the chapter “Restore Factory Defaults”.
1.2 Customer Support
Should you require any technical assistance, please contact your product reseller. Or you can visit our
website for latest product information. This document is subject to changes without prior notice.
website for latest product information. This document is subject to changes without prior notice.