BandRich Inc. 30P58 Manual Do Utilizador

18 

 

 

 

 

 

Note: You may be required to reconnect to the device if you 
change these settings from the factory default.

 

 

User Number Control Select from the drop-down menu the maximum 
number of client devices (1-10) allowed to connect to your WLAN. 

 

User List Client devices that are connected to your WLAN are listed in 
tabular form, which displays the Device Name, MAC Address and IP. 

 

SSID Network name of your WLAN. It is case sensitive and can not 
exceed 32 characters. By default, the SSID is "BR_LTE + last 4 digits of 
the device's MAC address". The default SSID is also printed on the 
network information card. 

 

Wi-Fi On/Off Software option to enable or disable the WLAN function. By 
selecting the Off option, you disable WLAN functions. Select On to 
re-enable. If you have selected the Off option when connected via WLAN, 
use the USB cable to regain access to the web interface. This option does 
not affect the Internet connection and does not override the hardware 
switch. 

 

To preserve the changes you have made, click Save. To delete the 
changes, click Cancel. 

 

 

Wi-Fi Protected Setup (WPS) is a standard designed for easy setup and 
automatic configuration of secure Wi-Fi networks between two WPS 
supported devices. If your wireless adapter supports WPS, the WPS 
feature can be a user-friendly and simple process to get your WLAN up 
and running. 

 

If the client device supports WPS, you can perform the following steps to 
connect the client device to your WLAN. 

 

1.  Press the WPS button located on the side of the device or click 

Connect. This initiates a search for client devices for 120 seconds. 

 

2.  Press the WPS button on client device or the software WPS button 

on the client device. 

 

If you wish to manually pair with a client device, enter the PIN from the 
client device WPS software in WPS PIN and click Submit. The device will 
attempt to pair with the client device using WPS.