BandRich Inc. 35M168 Manual Do Utilizador
Installation
7
Mounting
1. Choose a solid wall/ground to mount the CPE.
2. Mount on a wall/pole that can sustain the CPE dimensions and weight.
3. Mount upright on a vertical surface.
Position Adjustment
1. The CPE must be directed towards the nearest base station. By pointing the CPE
in the proper direction ensures that you receive the strongest signal.
2. Fine tune the signal by adjusting the orientation horizontally or vertically to
increase the CPE signal strength.
3. To verify the signal strength level:
Check the LEDs on the front panel - more lighted LEDs indicates stronger
signal.
Access the web management and go to Basic Mode > Status > Mobile
Internet > Signal Quality to view the Rx signal strength.
Warning:
To receive stronger signal and to avoid possible RF radiation, please
do NOT place your head or body in front of the CPE while you are
positioning the CPE or checking the signal strength LEDs on the front
panel.
positioning the CPE or checking the signal strength LEDs on the front
panel.