RIOTEC CO. LTD R8001 Manual Do Utilizador
Version 1.4, 2012/10/4
3. Software & Operation Mode
3.1 Scanner Role
▓ Device Name: RIOTEC-6 碼 BD_ADDR
▓ PIN Code: 1234
▓ Baudrate: 115200, 8, n, 1
▓ HW Flow Control: Disable
■ PIO Definition in SPP/HID mode:
▓ PIN Code: 1234
▓ Baudrate: 115200, 8, n, 1
▓ HW Flow Control: Disable
■ PIO Definition in SPP/HID mode:
Pins
Type Function
Descriptions
PIO 2
(Out) Discoverable
0: Not Discoverable; 1: Discoverable
PIO 3
(Out) Connected
0:
Normal; 1: Connected
PIO 4
(Out) Connecting
0: Normal; 1: Indicates that the scanner is try to connect to the
cradle.
PIO 5
(Out) Link
loss
0: Normal; 1: Indicates unintended connection loss due to bad
RF signal or uninformed disconnected. The signal state will
change back to 0 if BT-1041 receives the AT+D=xxxxxxxxxxxx
command.
PIO 6
(In) Mode
Switch
0:HID; 1:SPP; Drive to proper line state to switch between
operation modes.
PIO 7
(In)
Unplut(HID mode) /
Reset baud(SPP mode)
HID mode : Unplug / SPP mode : Set baud-rate 115200
PIO 8
(In)
Bluetooth Disconnect
(SPP mode only)
0:Normal; 1: Disconnect; Drive high for at least 30mS to
disconnect
PIO 9
(Out)
NUM_LOCK
(HID mode only)
0: Num Lock OFF; 1: Num Lock ON
PIO 10
(Out)
CAPS_LOCK
(HID mode only)
0: Caps Lock OFF; 1: Caps Lock ON
PIO 11
(Out)
In Connected state, the LED is always OFF.
For other states, the LED pattern consists of an 100ms on and
a specified period off,
The period of Ready / Idle state is 6000ms
The period of Inquiry / Discoverable state is 200ms
The period of Connecting state is 200ms
For other states, the LED pattern consists of an 100ms on and
a specified period off,
The period of Ready / Idle state is 6000ms
The period of Inquiry / Discoverable state is 200ms
The period of Connecting state is 200ms
Bluetooth Status LED
Page.
10