HARRIS CORPORATION TR-0054-E Manual Do Utilizador
MM-013994-001, Rev. Ap1
41
MESSAGE NAME DESCRIPTION
SYSC OFF System Scan
Features Off
Indicates the System Scan features are disabled.
LOW BATT Low Battery Battery voltage has dropped to the point to where the radio is no longer able
to transmit. The radio will still receive calls until the battery is discharged
beyond the point of operation at which time the radio automatically shuts
down.
beyond the point of operation at which time the radio automatically shuts
down.
RXEMER
Receive
Emergency
Emergency
Indicates an emergency call is being received. This message will be
flashing on line two.
flashing on line two.
TXEMER
Transmit
Emergency
Emergency
Indicates an emergency call has been transmitted on this radio. This
message will be flashing on line two.
message will be flashing on line two.
VOL=31
Volume Level Indicates the current volume level. The volume level display ranges from
OFF (muted) to 40 (loudest).
WHC
Who Has
Called
Called
Indicates an individual call has been received, but not responded to. The
indicator turns OFF if the individual call mode is entered, the system is
changed, or the radio is turned off and then on again.
indicator turns OFF if the individual call mode is entered, the system is
changed, or the radio is turned off and then on again.
UNKNOWN Unknown ID Indicates an individual call is being received from an unknown ID.
8.6 ERROR
MESSAGES
If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs
servicing.
servicing.
DSP ERR
ERR=XXXX
ERR=XXXX
(PowerUp
only)
only)
or
DIG V
x
ERR
x
Where
xxxx
is the error code and
DSP ERR
or
DIG V ERR
is the message.