Cambridge Silicon Radio Ltd CNS12015 Manual Do Utilizador
Proximity Beacon Instructions
Page 1 of 2
© Cambridge Silicon Radio Limited 2013
CS-00000-RPPA
This material is subject to CSR’s non-disclosure agreement
www.csr.com
SR
R
R
et
ai
l Tag
In
In
str
u
u
ctions
Man
u
al
Introduction
The CSR CNS12015 Proximity Beacon is a standalone device, designed to be maintenance free, there
are no user serviceable parts in the device. The CSR beacon uses the ISM band of 2.4GHz to 2.5HZ to
operate, uses extremely low power, the power output will be no more than 0dBm, which enables
the battery life to be extended. This model is designed to operate using 2 AA alkaline batteries. The
typical battery life for the device is greater than 3 years.
The beacon is design to be positioned on or near to a location or object (e.g. a shelf in a store). The
Beacons sole function is to transmit a pre-set unique number, which will allow a simple application
loaded onto a smart phone to link to a website or backend service which would provide content,
URL, action and / or information about an associated location.
The BLE Proximity Beacon can be positioned on the shelf or under it, it can be positioned near to a
location or tied to an object using magnets, bolts or a simple cable tie.
The Beacon is shipped with its batteries installed; simply pull the pull tab to activate the beacon.
The unit is now operating and the installer or developer can now program the beacon using the CSR
Field Service Application (FSA). Once the beacon is programmed the developer or installer is able to
associate actions and or content with this beacon using the CSR web APIs to manage the beacon.
End-Users with applications that use CSR’s client may now detect the CSR beacon and the app will
receive instruction on how to react.
Regulatory Notices
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's
the user's
authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le onctionnement.
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le onctionnement.
Les changements ou modifications non expressément approuvés par la partie responsable de la
conformité
pourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.
pourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.