Raymarine UK Ltd. LTB Manual Do Utilizador
Constant
RED
RED
1.
Alternate
RED and
GREEN
RED and
GREEN
4.
Brief
GREEN
Flashes
GREEN
Flashes
2.
RED
Flashes
Flashes
IMMEDIATELY press and
release Tag button, to
activate (switch on) the Tag
release Tag button, to
activate (switch on) the Tag
When you have fitted the Tag
battery, bring the Tag near to
battery, bring the Tag near to
your LifeTag system Base
Station and switch on power
Station and switch on power
to the Base Station.
Note: If registration does not
start, switch the Base Station
off then on again, then repeat
steps 2 to 4
start, switch the Base Station
off then on again, then repeat
steps 2 to 4
5. When registration is complete,
the Tag is operational and
ready to be used with your
LifeTag system.
ready to be used with your
LifeTag system.
Check that within the next
15 seconds, registration
starts.
15 seconds, registration
starts.
3.
Register Tag
Registration must be completed within one
minute of switching on power to the Base Unit.
minute of switching on power to the Base Unit.
Important
REGISTRATION START
REGISTRATION COMPLETE
Press and release Tag
button again.
button again.
84196_1.fm Page 2 Thursday, March 30, 2006 3:11 PM