Baby's Journey Inc. 5F62146TX Manual Do Utilizador
Features & Components
2.4” Color Video Monitor
User Guide
5F62146
• Please read the following instructions and safety warnings
before you install the Video Monitor.
• Please retain these instructions for future reference
• Tool needed: Phillips Head Screwdriver (not included).
• Additional camera(s) (sold separately).
• For use with children from birth and up.
before you install the Video Monitor.
• Please retain these instructions for future reference
• Tool needed: Phillips Head Screwdriver (not included).
• Additional camera(s) (sold separately).
• For use with children from birth and up.
Important guidelines for installing your Video Monitor
Getting Started
The Monitor and Camera use a 2.4 GHz radio frequency to synchronize
to each other. The range for this frequency may be affected by environmental
conditions in your home such as; walls, floors, ceilings, Wi-Fi routers, microwave
ovens, cordless phones, Bluetooth devices, home computers, among other
electronic devices. It is recommended to keep your Monitor away from
these types of devices at least 5 feet. If the signal is weak, try moving the
Monitor and/or Camera to different positions in the rooms.
to each other. The range for this frequency may be affected by environmental
conditions in your home such as; walls, floors, ceilings, Wi-Fi routers, microwave
ovens, cordless phones, Bluetooth devices, home computers, among other
electronic devices. It is recommended to keep your Monitor away from
these types of devices at least 5 feet. If the signal is weak, try moving the
Monitor and/or Camera to different positions in the rooms.
1 Connect Camera to AC outlet.
2 To turn ON, slide the ON/OFF switch to the ON position.
The Power ON Indicator will illuminate green.
The Power ON Indicator will illuminate green.
3 To turn OFF, slide the ON/OFF switch to the OFF position.
Important Safety Warnings
Video ON/OFF Key
Sound level Indicator
2.4 inch Video Screen
Menu Key
Volume Down & Left Key
Volume Up & Right Key
Power ON/OFF & Enter Key
AC Adapter Jack
Speaker
Belt Clip
Stand
Reset Button
A
B
C
D
E
F
B
C
D
E
F
H
G
I
J
J
K
L
L
Monitor
Camera
B
C
D
G
M
Q
S
R
T
N
O
P
O
P
U
H
J
L
K
Antenna
Nighttime Infrared LED Lights
Camera Lens
Microphone
Power On Indicator
Pair Button
Power ON/OFF Switch
AC Adapter Jack
Wall Mount Notch
Room Darkening
Automatic Sensor
Automatic Sensor
M
N
O
P
Q
R
O
P
Q
R
S
T
T
U
V
V
Set-up of your Camera
Once you have successfully established a connection between the Camera and
Monitor, it is time to determine a safe location to place the Camera.
IMPORTANT: Never place Camera or cords within 3 feet (0.9 m) of children’s reach.
Monitor, it is time to determine a safe location to place the Camera.
IMPORTANT: Never place Camera or cords within 3 feet (0.9 m) of children’s reach.
Determine a safe location for the Camera that will provide the best view of
your baby. Place the Camera on a flat surface, such as a dresser, bureau,
or shelf or wall mount it using the supplies provided. If you choose to wall
mount the Camera, ALWAYS use the security clips provided to secure the
cord to the wall.
your baby. Place the Camera on a flat surface, such as a dresser, bureau,
or shelf or wall mount it using the supplies provided. If you choose to wall
mount the Camera, ALWAYS use the security clips provided to secure the
cord to the wall.
Monitor Menu Icons
To prevent cord entanglement and strangulations:
• Do not place the Camera or AC adaptor cord within reach of children.
• Do not place the Camera or AC adaptor cord in, or attach it to, a crib or playpen.
• Always fasten the AC adaptor cord of the Camera on the wall with the security clips provided.
• Never use extension cords with AC adaptors. Use only AC adaptors provided.
• Do not place the Camera or AC adaptor cord within reach of children.
• Do not place the Camera or AC adaptor cord in, or attach it to, a crib or playpen.
• Always fasten the AC adaptor cord of the Camera on the wall with the security clips provided.
• Never use extension cords with AC adaptors. Use only AC adaptors provided.
Important Safety Instructions:
• Adult assembly is required. Keep small parts away from child’s reach.
• This product is not a toy. Do not allow children to play with it.
• This Video Monitor is not a substitute for responsible adult supervision.
• Test the Video Monitor and all its functions so that you are familiar with it prior to actual use.
• When the power adaptor is plugged into an electrical outlet, do not touch the exposed end.
• Adult assembly is required. Keep small parts away from child’s reach.
• This product is not a toy. Do not allow children to play with it.
• This Video Monitor is not a substitute for responsible adult supervision.
• Test the Video Monitor and all its functions so that you are familiar with it prior to actual use.
• When the power adaptor is plugged into an electrical outlet, do not touch the exposed end.
Caution – risk of heat generation, fire or explosion.
* Li-ion battery is built into the product.
• Charge the product by the designated charging method.
• Do not place the product in or near fire, or put the product in a microwave.
• Do not expose the product to high temperatures above 140 F.
• Do not disassemble the product.
• Do not expose the product to excessive shock such as drooping
* Li-ion battery is built into the product.
• Charge the product by the designated charging method.
• Do not place the product in or near fire, or put the product in a microwave.
• Do not expose the product to high temperatures above 140 F.
• Do not disassemble the product.
• Do not expose the product to excessive shock such as drooping
from a high place.
• Keep the product dry.
Dispose of the product appropriately.
V
Camera:
1 Connect Monitor to AC outlet.
2 To turn ON, press and hold the Power ON/OFF key for 3 seconds until
“Hello” screen disappears.
“Hello” screen disappears.
3 Now that the Monitor and Camera are turned on, video captured by
the Camera will appear on the video screen.
the Camera will appear on the video screen.
4 To turn OFF, press and hold the Power ON/OFF key for 3 seconds until
the “Goodbye” screen disappears.
the “Goodbye” screen disappears.
IMPORTANT: The Camera and Monitor are already paired; in the event that the
connection is lost you will need to pair the Camera to the Monitor.
To pair, follow the steps provided under “Using Video Monitor” section.
connection is lost you will need to pair the Camera to the Monitor.
To pair, follow the steps provided under “Using Video Monitor” section.
Monitor:
Instructions continued on reverse side.
Using your Video Monitor
Auto View Orientation – Portrait to Landscape
Your Video Monitor is able to switch from Portrait to Landscape view, simply
place the Monitor in the upright position for Portrait View and lay it on its
side for Landscape View. Note: There is a one second delay when switching
views, this is a normal function.
place the Monitor in the upright position for Portrait View and lay it on its
side for Landscape View. Note: There is a one second delay when switching
views, this is a normal function.
Night Vision Mode
The Camera features eight Infrared LEDs around the lens designed to capture
clear images in dark environments or at night. When the Light Sensor detects
low light levels, the Night Vision Mode will automatically activate and the video
shown in the Monitor will display in black and white. The “ ” icon will be
displayed on the screen.
clear images in dark environments or at night. When the Light Sensor detects
low light levels, the Night Vision Mode will automatically activate and the video
shown in the Monitor will display in black and white. The “ ” icon will be
displayed on the screen.
Charging the Battery
Your Video Monitor has an internal, non-replaceable, lithium-ion rechargeable
battery. Charge the battery by connecting the Monitor to a power outlet using
the power cord provided.
battery. Charge the battery by connecting the Monitor to a power outlet using
the power cord provided.
Video ON/OFF
This feature allows you to turn the video screen OFF while maintaining the audio
monitor ON. Simply press the Video ON/OFF key to turn the video screen ON or OFF.
monitor ON. Simply press the Video ON/OFF key to turn the video screen ON or OFF.
IMPORTANT: When the Monitor is on battery mode, the Video Screen will
automatically turn OFF after 5 minutes. This sleep mode helps conserve battery power.
To turn video back ON, simply press the Video ON/OFF button.
automatically turn OFF after 5 minutes. This sleep mode helps conserve battery power.
To turn video back ON, simply press the Video ON/OFF button.
Strangulation Hazard - Children have STRANGLED
in cords. Keep this cord out of the reach of children
(more than 3 feet (0.9 m) away).
in cords. Keep this cord out of the reach of children
(more than 3 feet (0.9 m) away).
WARNING!
Security Clips (6)
Wall Anchor
Screw
AC Adapters (2)
E
F
I
A
Signal Level (5 Levels)
Camera Selected (can pair up to 4 cameras,
additional cameras sold separately)
Battery Level or Charging Status (5 Levels)
Night Vision Mode (Video changes to Black and White)
Camera Scanning
(scan up to 4 Cameras with each scan duration of 10 seconds)
Volume Level Control (7 Levels)
Brightness Level Control (7 Levels)
Zoom Level Control (1x, 2x)
Place the Camera and cords more than 3 feet (0.9m) away from your child
Place the Camera and cords more than 3 feet (0.9m) away from your child