Aclara Power-Line Systems Inc. Y72553-1 Manual Do Utilizador

T W A C S

®

- O R I O N

®

  f o r   U M T   P r o d u c t s   U s e r   G u i d e

EMTR3 Menu

When the list first displays, the cursor highlights the first item on the list. 

Press the 

 key to move the cursor through the list. For more 

When you reach the third list item, you can push the down arrrow again to 

view any items below it, but the cursor stays at the bottom of the display 

while the entire display shifts down.

When you press the 

 key on an empty port (no IED serial number for the 

selected port) in the Port List, the installation process begins. The Select IED S/N 

screen allows you to manually enter the desired IED serial number for installation. 

If that serial number is already located on another port, the Duplicate Detected 

Error screen displays. If the serial number is not already located on another port, 

you will be promped to select a service type.

When entering an ORION gas or water IED serial number for installation, if the 

serial number is less than than 79,999,999, drop the first digit, “7”, and enter 

the seven remaining digits. For all ORION gas and water IEDS with serial 

numbers equal to or greater than 80,000,000, enter all digits of the IED, which 

will be from 8 to 10 digits.

Use the following procedure to install an IED using Manage Port List.

Follow the steps in Manage Port List on page 27 to view the Port List.

Press 

 on an empty port to view the Select IED S/N screen.

IED  xx/xx  P  SR

                    Empty           X    
                    Empty           X    
                    Empty           X    

EMTR:  ssssssssss

Enter Serial Number
IED S/N__________
Enter to Accept

DRAFT