Aclara Power-Line Systems Inc. Y72553-1 Manual Do Utilizador

T W A C S

®

- O R I O N

®

  f o r   U M T   P r o d u c t s   U s e r   G u i d e

Performing Remote Analysis (TNS)

The CCE has the capability to decide the quality of a TC reading based on the 

Hour of Reading and Configuration field in the status byte of the Total 

Consumption registers.

If the Hour of Reading and Configuration field is equal to zero, the CCE marks the 

TC data as suspect. If this is the case, there is no EMTR-3 present.

If the Hour of Reading and Configuration field is equal to twenty five, the CCE 

marks the quality of TC data appropriately.

If this is the case, the time and date stamp for the data is more than twenty four 

hours old.

When the Hour of Reading and Configuration is equal to twenty five or twenty 

six, the CCE uses the current date and time to mark when the TC data was received 

at the master station.

If the Hour of Reading and Configuration field is equal to twenty six, the CCE 

marks the quality of TC data appropriately based on the utility configured quality 

rules. If this is the case, the time and date stamp for the data is invalid.

If the Hour of Reading and Configuration field is equal to thirty, the CCE marks 

the TC data as suspect. If this is the case, an IED is installed but no data has been 

received yet.

If the Hour of Reading and Configuration field is equal to thirty one, the CCE 

marks the TC data as suspect. If this is the case, there is no IED installed on this 

port.

TNS has the capability to produce IED Configuration Data files, as defined in this 

section, for export to other applications. The IED Configuration Data export file is 

composed of a number of records.

Each data record in the IED Configuration Data export file contains the data fields 

listed in Table 2.

Each data record in the IED Configuration Data export file always populates the 

following fields: Meter Number, Serial Number, Serial Port and Device Type.

Any field in an IED Configuration Data record that is not populated is left blank. 

The IED Configuration Data export file is a delimited file constructed by 

sequentially delimited data records. The comma and vertical pipe characters are 

valid delimiters for an IED Configuration Data export file.

Each data record in the IED Configuration Data export file is separated by a 

line-feed and carriage return character (in that order).

DRAFT