Wavenet Technology Pty Ltd. BM3900M Manual Do Utilizador
Boomer-III User Manual & Integrator’s Guide____________________________________________ Modem Test Jig
BM310012WT05
53
Copyright Wavenet Technology © October 2003
Using the Modem Test Jig
The Boomer-III modem may be used with the Boomer-II Test Jig
which provides RS-232 serial interface ports between a PC and the
modem. It is designed to enable you to quickly interface the
Boomer-III to a standard PC (through a COM port) or a terminal device
with an RS-232 serial port.
The test jig acts as a temporary host/terminal for the modem and
provides access points to the radio’s communication port, allowing you
to monitor activity with a logic probe, multimeter or oscilloscope.
which provides RS-232 serial interface ports between a PC and the
modem. It is designed to enable you to quickly interface the
Boomer-III to a standard PC (through a COM port) or a terminal device
with an RS-232 serial port.
The test jig acts as a temporary host/terminal for the modem and
provides access points to the radio’s communication port, allowing you
to monitor activity with a logic probe, multimeter or oscilloscope.
Features
All Input/Output Lines configurable by jumpers and/or
accessible through parallel FPC connector.
accessible through parallel FPC connector.
On-board dual RS232 Serial Communication interface ports
with DB9 connectors
with DB9 connectors
Through the SPY MODEM connector, you can monitor the data
transmitted from the modem (RX, DSR, and CTS).
transmitted from the modem (RX, DSR, and CTS).
Through the PORT 2/SPY PC connector, you can monitor the
data transmitted from the PC (TX, RTS and DTR), or talk to the
second serial port of the modem. You can make this choice by
putting all five jumper links on the right or left side of the RDW
header connector near the port.
data transmitted from the PC (TX, RTS and DTR), or talk to the
second serial port of the modem. You can make this choice by
putting all five jumper links on the right or left side of the RDW
header connector near the port.
Switches and LED indicators on SS0 - SS3 modem I/O lines.
On-board voltage regulator for Boomer-III OEM supply rail.
On-board LEDs for three external signals:
o
Low battery
o
Message waiting
o
In range
On-board antenna matching network allowing conversion from
MMCX to SMA connectors.
MMCX to SMA connectors.
Test Jig Updates
From time to time updates may be provided for the test jig and these
should be implemented as per the Update Notice. If you are unsure if
your test jig incorporates all the latest updates please contact Wavenet
Technology.
From time to time updates may be provided for the test jig and these
should be implemented as per the Update Notice. If you are unsure if
your test jig incorporates all the latest updates please contact Wavenet
Technology.