Tactel AB BLUE-M Manual Do Utilizador

Getting started - page 5

 

If your device does not connect or you are experiencing other problems, please read on.You might be able to get help from the ashing 

 

on the button read more about that in section 6.1 The Button.

 

The button on the BlueT will light up and blink rapidly for several seconds while you ’re connecting your BlueT to other Bluetooth devices. 

 

When you have  a Bluetooth link up and running the button will blink once every 4 seconds, to show that you are connected. When you 

 

send and receive data the button will blink more rapidly.

 

The pairing process is a crucial operation.If this doesn ’t work, you won ’t be able to connect or use any Bluetooth features.So make sure 

 

that your other Bluetooth enabled phone is in Discoverable mode when you ’re trying to connect. See 6.4 Discoverable mode for help 

 

on that.

 

When using HotSync over a Bluetooth connection the largest problem usually isn ’t the Palm or the BlueT,but the computer ’s conguration. 

 

To make sure that the Bluetooth device on the computer is working correctly, please refer to the device ’s user manual.

 

The procedure to set your Bluetooth-enabled device into Discoverable mode is different with almost every Bluetooth device.This is why you 

 

need to refer to the manual for your specic Bluetooth device.The purpose of Discoverable mode is that you put the device in a nder ’s 

 

mode.It is sending out a signal that  can be discovered by any Bluetooth device searching for one,e.g.the BlueM that you have just 

 

bought.The passkey is used as a security measure so that no one else can pair with your Palm or phone.