Wistron Corporation MS2146BG Manual Do Utilizador

NOTE: If the selected network has 802.11x authentication, you must first create 
a profile using the Profile Wizard. However, if the network has no WEP security 
(Open), WEP 64 or 128-bit encryption, or WPA-PSK, you can enter the required 
security settings in the dialog that displays after clicking the Connect button. 
Then a one time connection without a profile can be made.

●     

The selected network has WPA-PSK security settings: If the 
selected network has 802.1x authentication security settings, after 
clicking the Connect button, the Profile Wizard Advanced Security 
page will display. From this dialog you can enter the 802.1x settings 
and connect to the network.

●     

The selected network has no (Open) WEP security settings:  If the 
selected network has no security (Open). Click the Connect button to 
connect to the network.

●     

The selected network has WEP security settings: If the selected 
network has WEP encryption security settings, after clicking the 
Connect button, the Profile Wizard Advanced Security page will 
display. From this dialog you can enter the WEP security settings and 
connect to the network.

8.  Click OK to connect to a network.

An infrastructure network consists of one or more access points and one or more 
computers with wireless adapters installed. Each access point must have a wired 
connection to the Local Area Network (LAN).

You can connect to a network by first creating a new profile using the Profile Wizard, 
then selecting that profile to connect to the network access point using the Connect 
button. You can also connect to a network, by using the Scan button. Refer to 

 for more information.