Beissbarth GmbH FAA2400 Manual Do Utilizador
FAA2400
Seite 1 von 15 16/04/00
2.4GHz WIRELESS DATA TRANSCEIVER MODULE
FAA2400 is a wireless transceiver module for half-duplex data transmission in the 2.4GHz ISM
band. FAA2400 operates with digital data rates of more than 500kbps over distances of about
200m (line of sight) or 30m (inside buildings).
FAA2400 allows the construction of 2.4GHz wireless links accordingly BAPT222 ZV125 in
Germany and I-ETS-300440 in Europe and the corresponding international regulations in
combination with a simple microcontroller.
band. FAA2400 operates with digital data rates of more than 500kbps over distances of about
200m (line of sight) or 30m (inside buildings).
FAA2400 allows the construction of 2.4GHz wireless links accordingly BAPT222 ZV125 in
Germany and I-ETS-300440 in Europe and the corresponding international regulations in
combination with a simple microcontroller.
Features
•
Miniature module for PCB mount
•
Size (without contact pins) 33 x
30.5 x
8 mm³
•
Mounting and electrical connection with contact pins (2.54mm grid)
•
BAPT222 ZV125 and I-ETS-300440 tested and approved, meets also other
international regulations for 2.4GHz ISM
international regulations for 2.4GHz ISM
•
Worldwide registration for the 2.4GHz ISM band possible
•
Maximum halfduplex data rate of 500kbps
•
Modulation type 2FSK (2 Level Frequency Shift Keying)
•
Frequency range 2.4 bis 2.4835 GHz (up to 2.5 GHz also possible),
PLL synthesizer
PLL synthesizer
•
Frequency steps and frequency channels free programmable
•
Receive and transmit frequency programmable also while operating
•
Transmission power –30 to +5dBm typical (5
0
W) with simple DC control
•
Typical input sensitivity of –96dBm (Baudrate 200kbit/s)
•
Range of about 30m inside buildings and about 200m with line of sight (using
2.4GHz 0dBd antenna, full transmit output power)
2.4GHz 0dBd antenna, full transmit output power)
•
Current consumption of typical 55mA in transmit and 50mA in receive mode at
3.2 to 6.0V
3.2 to 6.0V
•
Standby mode for power saving
•
Logic inputs and outputs 3V CMOS compatible
•
Separate data input and output
Note: Please take care for sufficient ESD protection when using the FAA2400!
FCC ID: PWPFAA2400