Wellink Corporation NEOBIT1014VA Manual Do Utilizador

First, check for the IP protocol and, if necessary, install it: 

1.  In the Windows task bar, click the Start button, point to 

Settings, and then click Control Panel. 

2.  Double-click the Network and Dial-up Connections icon. 

3.  In the Network and Dial-up Connections window, right-click 

the Local Area Connection icon, and then select Properties. 

The Local Area Connection Properties dialog box displays with 
a list of currently installed network components. If the list 
includes Internet Protocol (TCP/IP), then the protocol has 
already been enabled. Skip to step 10. 

4.  If Internet Protocol (TCP/IP) does not display as an installed 

component, click 

. 

5.  In the Select Network Component Type dialog box, select 

Protocol, and then click 

. 

6. Select 

Internet Protocol (TCP/IP) in the Network Protocols 

list, and then click 

. 

You may be prompted to install files from your Windows 2000 
installation CD or other media. Follow the instructions to install 
the files. 

7.  If prompted, click 

 to restart your computer with 

the new settings. 

Next, configure the PCs to accept IP information assigned by the 
NEOBIT 1014VA: 

8.  In the Control Panel, double-click the Network and Dial-up 

Connections icon. 

9.  In Network and Dial-up Connections window, right-click the 

Local Area Connection icon, and then select Properties. 

10.  In the Local Area Connection Properties dialog box, select 

Internet Protocol (TCP/IP), and then click 

.  

11.  In the Internet Protocol (TCP/IP) Properties dialog box, click 

the radio button labeled Obtain an IP address 
automatically. Also click the radio button labeled Obtain 
DNS server address automatically. 

12. Click 

 twice to confirm and save your changes, 

and then close the Control Panel.