Wellink Corporation NEOBIT1014VA Manual Do Utilizador

 

 

33 

Getting Started with the Configuration Manager 

The NEOBIT 1014VA includes a preinstalled program called the 
Configuration Manager, which provides an interface to the software 
installed on the device. It enables you to configure the device 
settings to meet the needs of your network. You access it through 
your web browser from any PC connected to the NEOBIT 1014VA 
via

 

the LAN or USB ports. 

This chapter describes how to use the Configuration Manager. 

The Configuration Manager program is preinstalled into memory on 
the NEOBIT 1014VA. To access the program, you need the 
following: 

 A PC or laptop connected to the LAN port on the device as 

described in the Quick Start chapter. 

 A web browser installed on the PC. The program is 

designed to work best with Microsoft Internet Explorer® 
version 5.0, Netscape Navigator® version 4.7, or later 
versions. 

You can access the program from any computer connected to the 
NEOBIT 1014VA via the LAN or USB ports. 

1.  From a LAN computer, open your web browser, type the 

following URL in the web address (or location) box, and 
press <Enter>: 

Or, from the USB computer, type: 

These are the predefined IP addresses for the LAN and USB 
ports on the NEOBIT 1014VA.

 

A login screen displays, as shown in Figure 12.