Comba Telecom Ltd. MBDA-200 Manual Do Utilizador
USER MANUAL FOR MBDA-200
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 28
3.5 EQUIPMENT CONNECTION
3.5.1 GROUNDING CONNECTION
3.5.2 mBDA GROUNDING CONNECTION
Step 1: Connect the GND cable to the GND connector and the building EARTH. Recommended GND
cable size is # 12 AWG.
Step 2: Ensure the GND cable is connected to building GND.
cable size is # 12 AWG.
Step 2: Ensure the GND cable is connected to building GND.
Figure 21: mBDA Grounding (mBDA Rear Panel)
3.5.3 mBDA CONNECTIONS
Step1: Connect the mBDA DT port to the RF Source downlink, and then connect mBDA MT port with RF
Source uplink.
Step 2: Connect the power cable to the power supply port (100-240VAC, 1Amp maximmum).
Source uplink.
Step 2: Connect the power cable to the power supply port (100-240VAC, 1Amp maximmum).
WARNING!
This unit must always be grounded. Consult an appropriate electrical
inspection authority or an electrician if you are uncertain that suitable
grounding is available.
Do not connect power before grounding.
Grouding Connector