Winmate Inc. 1200 Manual Do Utilizador
ACCESS POINT
30
5.2.8 SNMP Traps
SNMP traps are messages that are displayed in the bottom right hand corner of the
main window specifying AP actions. Available trap messages are:
SNMP traps are messages that are displayed in the bottom right hand corner of the
main window specifying AP actions. Available trap messages are:
• Trap Re-association: This trap message is sent when a Station’s re-association
request is received from the AP - Bridge.
• Trap Association: Indicates the reception of an association request packet and
the sender station's successful association with the wireless bridge.
• Trap Disassociation: This trap message is sent when a disassociation
notification packet is received from a station.
• Trap Reset: This trap message is sent when the AP-Bridge resets.
• Trap Setting IP Address with Ping: This trap message is sent when the
AP-Bridge IP address is set with the transmission of a ping message.
• Trap Start Up: This trap message is sent when bridge starts up.
• Trap Failed To Erase Flash: This trap message is sent when bridge fails to
erase flash.