Xsilogy Inc. 0920HP Manual Do Utilizador
Installation
Hardware Installation Instructions
3. Fasten the small, red wire on the BattGuard shunt to the positive
terminal of the battery.
4. Connect the ribbon cables on the BattGuard Telesensor to the
connectors on the BattGuard shunt.
The BattGuard Telesensor begins its initialization process
automatically. Once initialized, the “CON” indicator will be off, the
“STA” indicator will be lit until the Telesensor is able to send its data
to the End-of-String Master, and the “TX,” “LQ,” and “RX” will flash
briefly during transactions with the Master (every 15 minutes).
automatically. Once initialized, the “CON” indicator will be off, the
“STA” indicator will be lit until the Telesensor is able to send its data
to the End-of-String Master, and the “TX,” “LQ,” and “RX” will flash
briefly during transactions with the Master (every 15 minutes).
5. Repeat steps 1 through 4 for all batteries to be monitored.
Preliminary Release X1
2-5