Netgear 06100042 Manual Do Utilizador

TM

Wireless Configuration

2-11

Click Add to add your entry. You can add several stations to the list, but the entries will be 
discarded if you do not click Apply.

6. Make sure the Turn Access Control On check box is selected, then click Apply.

Now, only devices on this list will be allowed to wirelessly connect to the wireless modem router. 
This prevents unauthorized access to your network. 

A high performance client like the NETGEAR WN511B must connect using WPA2-PSK in order 
to achieve maximum performance. Wireless clients that connect to this router using WPA-PSK 
will run at no more than 802.11g speed. This option allows wireless clients to use either encryption 
method.

To configure WPA-PSK + WPA2-PSK, follow these steps:

1. Log in at the default LAN address of 

 with the default user name of admin 

and default password of password, or using whatever LAN address and password you have 
set up.

2. Click Wireless Settings in the Setup section of the main menu of the DG834N. 

Note: You can copy and paste the MAC addresses from the wireless modem router’s 

Attached Devices menu into the MAC Address box of this menu. To do this, 
configure each wireless computer to obtain a wireless link to the wireless 
modem router. The computer should then appear in the Attached Devices 
menu.

Note: If you are configuring the wireless modem router from a wireless computer 

whose MAC address is not in the Trusted Wireless Stations list, and you select 
Trusted Wireless Stations only, you will lose your wireless connection when 
you click Apply. You must then access the wireless modem router from a 
wired computer to make any further changes.

Note: Not all wireless adapters support WPA. Furthermore, client software is required on 

the client. Windows XP and Windows 2000 with Service Pack 3 do include the 
client software that supports WPA. Nevertheless, the wireless adapter hardware 
and driver must also support WPA. Consult the product document for your wireless 
adapter and WPA client software for instructions on configuring WPA settings.