Netgear 06100042 Manual Do Utilizador

TM

3-14

Protecting Your Network

Select the Adjust for daylight savings time check box if your time zone is currently in daylight 
savings time.

4. The wireless modem router has a list of NETGEAR NTP servers. If you would prefer to use a 

particular NTP server as the primary server, enter its IP address under Use this NTP Server.

5. Click Apply to save your settings.

If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu, 
you can set up a schedule for when blocking occurs or when access is not restricted. 

1. Log in to the wireless modem router at its default LAN address of http://192.168.0.1 with its 

default User Name of admin, default password of password, or using whatever Password and 
LAN address you have chosen for the wireless modem router.

2. Select the Schedule link of the Security menu to display menu shown above in 

.

3. To block Internet services based on a schedule, select Every Day or select one or more days. If 

you want to limit access completely for the selected days, select All Day. Otherwise, to limit 
access during certain times for the selected days, enter Start Blocking and End Blocking times.

4. Click Apply to save your changes.

Note: If your region uses Daylight Savings Time, you must manually select Adjust 

for Daylight Savings Time on the first day of Daylight Savings Time, and clear 
it at the end. Enabling Daylight Savings Time will cause one hour to be added 
to the standard time.

Note: Enter the values in 24-hour time format. For example, 10:30 am would be 10 

hours and 30 minutes and 10:30 pm would be 22 hours and 30 minutes. If you 
set the start time after the end time, the schedule will be effective through 
midnight the next day.