Netgear 06100042 Manual Do Utilizador

TM

Troubleshooting

6-9

This section explains how to restore the factory default configuration settings, changing the 
router’s administration password to password and the IP address to 192.168.0.1. You can erase the 
current configuration and restore factory defaults in two ways:

•

Use the Erase function of the Web Configuration Manager (see 

•

Use the Default Reset button on the rear panel of the router. Use this method for cases when 
the administration password or IP address is not known.

To restore the factory default configuration settings without knowing the administration password 
or IP address, you must use the Default Reset button on the rear panel of the router.

1. Press and hold the Default Reset button until the Test LED turns on (about 10 seconds).

2. Release the Default Reset button and wait for the router to reboot.

The E-mail menu in the Content Filtering section displays the current date and time of day. The 
RangeMax NEXT Wireless ADSL2+ Modem Router uses the Network Time Protocol (NTP) to 
obtain the current time from one of several Network Time Servers on the Internet. Each entry in 
the log is stamped with the date and time of day. Problems with the date and time function can 
include:

•

Date shown is January 1, 2000
Cause: The router has not yet successfully reached a Network Time Server. Check that your 
Internet access settings are configured correctly. If you have just completed configuring the 
router, wait at least five minutes and check the date and time again.

•

Time is off by one hour
Cause: The router does not automatically sense Daylight Savings Time. In the E-mail menu, 
check or uncheck the box marked “Adjust for Daylight Savings Time”.