Netgear 06200047 Manual Do Utilizador
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Reference Manual for the Mobile Broadband Router MBR814X
7-2
v2.0 BETA, January 2006
Incoming traffic from the Internet is normally discarded by the router unless the traffic is a
response to one of your local computers or a service that you have configured in the Ports menu.
Instead of discarding this traffic, you can have it forwarded to one computer on your network. This
computer is called the Default DMZ Server.
response to one of your local computers or a service that you have configured in the Ports menu.
Instead of discarding this traffic, you can have it forwarded to one computer on your network. This
computer is called the Default DMZ Server.
How to Configure a Default DMZ Server
To assign a computer or server to be a Default DMZ server, follow these steps:
1. Log in to the router at its default LAN address of
with its default User Name
of admin, default password of password, or using whatever Password and LAN address you
have chosen for the router.
have chosen for the router.
2. From the main menu, under Advanced, click the WAN Setup link to view the page shown
below:
3. Select the Default DMZ Server check box.
4. Type the IP address for that server.
5. Click Apply to save your changes.
Connect Automatically, as Required
Normally, this option should be enabled, so that an Internet connection will be made automatically,
whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable
this setting.
whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable
this setting.
If disabled, you must connect manually, using the sub-screen accessed from the "Connection
Status" button on the Status screen.
Status" button on the Status screen.
Figure 7-1