Netgear 08400101 Manual Do Utilizador
November 2008
Warning: Do not install this device on top of any other electrical equipment or
install any other equipment on top of this device. Keep this device away from any
heat sources such as direct sunlight, heaters, radiators, or other A/V receivers or
devices that emit heat.
install any other equipment on top of this device. Keep this device away from any
heat sources such as direct sunlight, heaters, radiators, or other A/V receivers or
devices that emit heat.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European
Union, this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2008 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks
of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
a. Click Wireless Settings in the main
menu. Select a Region. Do not change
the other settings. Click Apply
the other settings. Click Apply
b. Configure your computer to use the
Network Name (SSID) NETGEAR
with WEP Security disabled.
Warning: The Network Name (SSID)
is case sensitive. You must enter NETGEAR in your computer's wireless
settings. Entering nETgear will not work.
with WEP Security disabled.
Warning: The Network Name (SSID)
is case sensitive. You must enter NETGEAR in your computer's wireless
settings. Entering nETgear will not work.
c. To verify wireless connectivity, connect to the Internet or log in to the
wireless router from a computer with a wireless adapter.
d. You are now connected to the Internet and the wireless feature of the
wireless router is enabled! Next, configure your wireless computers to
connect to the NETGEAR Network Name (SSID).
connect to the NETGEAR Network Name (SSID).
Now, Set Up a Computer for Wireless Connectivity
1. Configure the computer’s Wireless Settings
Windows displays a list of available wireless networks,
and, when wireless security is disabled, you simply
choose yours from the list and connect.
and, when wireless security is disabled, you simply
choose yours from the list and connect.
2. Verify Wireless Connectivity
Connect to the Internet from a computer with a wireless
adapter.
You are now wirelessly connected to the Internet!
Important: Implement wireless security options appropriate to your needs.
The NETGEAR wireless router provides many wireless security options.
Your wireless computer may not support all of these options. Please log in to
adapter.
You are now wirelessly connected to the Internet!
Important: Implement wireless security options appropriate to your needs.
The NETGEAR wireless router provides many wireless security options.
Your wireless computer may not support all of these options. Please log in to
the router and read the help to identify the wireless security features of your
router that satisfy your requirements and work with your wireless computer.
router that satisfy your requirements and work with your wireless computer.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
Be sure to restart your network in this sequence:
Be sure to restart your network in this sequence:
1) Turn off the modem, wireless router, and computer; 2) Turn on the modem,
wait two minutes; 3) Turn on the wireless router and wait 1 minute; 4) Turn
on the computer.
wait two minutes; 3) Turn on the wireless router and wait 1 minute; 4) Turn
on the computer.
Make sure the Ethernet cables are securely plugged in.
•
•
The Internet status light on the wireless router will be lit if the Ethernet cable
to the wireless router from the modem is plugged in securely and the modem
and wireless router are turned on.
to the wireless router from the modem is plugged in securely and the modem
and wireless router are turned on.
•
For each powered on computer connected to the wireless router with a
securely plugged in Ethernet cable, the corresponding wireless router LAN
port status light will be lit. The label on the bottom of the wireless router
identifies the number of each LAN port.
securely plugged in Ethernet cable, the corresponding wireless router LAN
port status light will be lit. The label on the bottom of the wireless router
identifies the number of each LAN port.
Make sure the wireless settings in the computer and router match exactly.
The Wireless Network Name (SSID) and WEP security settings of the router
and wireless computer must match exactly.
and wireless computer must match exactly.
Make sure the network settings of the computer are correct.
•
•
Ethernet cable and wirelessly connected computers must be configured to
obtain IP and DNS addresses automatically via DHCP.
obtain IP and DNS addresses automatically via DHCP.
Check the router status lights to verify correct router operation.
•
•
If the Power/Test light does not turn solid green within 2 minutes of turning
the router on, or turn the power off and back on to see if the router recovers.
Or, use a pen tip to press and hold for 10 seconds the reset-to-default button
on the back of the router to clear the router’s configuration to factory defaults
to see if the router recovers.
the router on, or turn the power off and back on to see if the router recovers.
Or, use a pen tip to press and hold for 10 seconds the reset-to-default button
on the back of the router to clear the router’s configuration to factory defaults
to see if the router recovers.
•
If the Wireless light does not come on, verify that the wireless feature is
turned on by logging in to the router, and checking the “Enable Wireless
Router Radio” box in the Advanced Wireless Settings menu.
turned on by logging in to the router, and checking the “Enable Wireless
Router Radio” box in the Advanced Wireless Settings menu.
Technical Support
Thank you for selecting NETGEAR products.
After completing the Smart Wizard configuration assistant,
register your product at http://www.NETGEAR.com/
register. Registration is required before you can use our
telephone support service.
After completing the Smart Wizard configuration assistant,
register your product at http://www.NETGEAR.com/
register. Registration is required before you can use our
telephone support service.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmfu linterference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
FCC Rules. These limits are designed to provide reasonable protection against harmfu linterference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
Reset
Button