Netgear 09400127 Manual Do Utilizador

Página de 23
© 2010 by NETGEAR, Inc. All rights reserved.
 
 
 
 
You c
an change the default type to “Static” IP, by default, AP has default IP 192.168.1.240, and 
Bridge/STA has default IP 192.168.1.241, you can change the default IPs through this page (a 
factory default reset will reset them back to .240 and .241). 
 
MAC Address Filtering  
This function is only available on Access Point 
side, by default, it’s disabled. If enabled, it allows 
to filter out wireless clients if not on the allowed MAC list, for tightened security.