Netgear 09400127 Manual Do Utilizador
© 2010 by NETGEAR, Inc. All rights reserved.
Troubleshooting Tips
Q: STAs get the default IP 192.168.1.241. What in case of more than 1 STA?
A: In case of more than 1 STA, all STAs will have default 192.168.1.241. If the AP is connected
to a router, all STAs will get DHCP IPs from the router therefore there will be no IP conflict. The
IP conflict only affects your access to the STA GUI, it does not impact traffic from devices
behind the STAs, as they are just bridges.
A: In case of more than 1 STA, all STAs will have default 192.168.1.241. If the AP is connected
to a router, all STAs will get DHCP IPs from the router therefore there will be no IP conflict. The
IP conflict only affects your access to the STA GUI, it does not impact traffic from devices
behind the STAs, as they are just bridges.
Q: How does the access to the UI work in case that the devices are not connected to a DHCP
server?
A: Through default IP. So in case you have two STAs or more, you need to manually change
STAs to use different IPs. This is the same for Quantenna reference firmware you previously
tested.
server?
A: Through default IP. So in case you have two STAs or more, you need to manually change
STAs to use different IPs. This is the same for Quantenna reference firmware you previously
tested.