Netgear 10100130 Manual Do Utilizador

2-19

Wireless network name (SSID): ______________________________ 

•

If WPA2-PSK or WPA-PSK authentication is used: 

–

Passphrase: ______________________________ These characters are case-sensitive. 
Enter a word or group of printable characters. When you use WPA-PSK, the other devices 
in the network cannot connect unless they are set to WPA-PSK as well, and are configured 
with the correct passphrase. 

•

If WEP authentication is used:

–

WEP encryption key size. Identify one: 64-bit or 128-bit. The encryption key size must 
match the wireless network settings.

–

Data encryption (WEP) keys. There are two methods for creating WEP data encryption 
keys. Whichever method you use, record the key values in the spaces below.

•

Passphrase method: ______________________________ These characters are 
case-sensitive. Enter a word or group of printable characters and click the Generate 
Keys button. Not all wireless devices support the passphrase method.

•

Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex 
digits (any combination of 0–9 or a–f). For 128-bit WEP, enter 26 hex digits.

Key 1: _____________________________ Key 2: _____________________________ 

Key 3: _____________________________ Key 4: _____________________________ 

To configure WPA-PSK security:

1. Run the WNDA3100v2 Wireless Assistant.

a. Make sure that the WNDA3100v2 software is installed and the wireless USB adapter is 

fully inserted in a USB port in your computer.