Netgear 13300237 Manual Do Utilizador

Click Apply.

By default, the gateway allows any connected computer to access the Internet. The MAC 
Filtering screen lets you block specific computers, based on their MAC addresses, from 
access to the Internet on selected days and times.



In the main menu, under Advanced, select MAC 
Filtering. 

The Trusted Devices table shows computers that 
have access to the Internet through the gateway. 

In the Add MAC Filter table, use one of these 
methods to specify computers to block:

If the computer is in the Trusted Devices table, 
select its radio button. The MAC address is 
added into the Add MAC Filter table.

If the computer you want is not listed, click 
Refresh to update the Trusted Devices table.

If the computer is still not listed, complete the 
Device Name and MAC Address fields.

Click Add. 

The Enable check box for the computer in the MAC 
Filter List is automatically selected.

To block the computer, select the days and times:

Days to Block. Select the days to block the 
computer selected in the MAC Filter List. The default is Everyday.

WPS Settings

Disable router’s PIN

Selecting this check box disables the PIN that WPS 
clients use to connect to the gateway with the PIN 
method. Normally this check box is cleared, which is 
the default setting.

Keep Existing Settings

If a WPS client is added, the gateway automatically 
selects this check box. When the Keep Existing 
Settings check box is selected, the SSID and 
wireless security settings remain the same when 
more WPS clients are added.

Wireless Card 

Access List

Set-up Access List

Access control is disabled by default so that any 

computer that is configured with the correct SSID 
can connect.