Netgear WGR613VAL Manual Do Utilizador

3-6

Connecting the Router to the Internet

After logging in to the router, you will see the Internet connection Smart Wizard on the 
settings main page.

1.

You are now connected to the router. If you do not see the menu above, click the Setup Wizard 
link on the upper left of the main menu. 

2.

Click Next to proceed. Input your ISP settings, as needed.

Note: If you choose not to use the Setup Smart Wizard, you can manually configure your 
Internet connection settings by following the procedures in the Setup Manual on the CD. 

 

 
Unless your ISP automatically assigns your configuration automatically via DHCP, you will 
need the configuration parameters from your ISP.

3.

When the router successfully detects an active Internet service, the router’s Internet LED goes 
on. The Setup Smart Wizard reports which connection type it discovered, and displays the 
appropriate configuration menu. If the Setup Smart Wizard finds no connection, you will be 
prompted to check the physical connection between your router and the cable or DSL modem. 

4.

The Setup Smart Wizard will report the type of connection it finds and prompts you for the 
settings. 

5.

At the end of the Setup Wizard, click the Test button to verify your Internet connection and 
register your product. If you have trouble connecting to the Internet, use the Basic Setup 
Troubleshooting Tips below to correct basic problems, or refer to the Setup Manual on the CD.

You are now connected to the Internet and the wireless feature of the wireless router is 
enabled! Next, configure your wireless computer.